Notify me when the price drops
We will email you if we find a lower price on this product!
You may also like
You may also like12 Sets Chainsaw Chain Links Repair Part Size 3/8LP Pitch - 0.050 Gauge
9.19 USD
10 Pcs Fiber Optic Visual Fault Locator Replacement Tube Repair Part 7mm Ceramic
9.79 USD
Turntable 5 Pin DIN Female Plug Tonearm Connector LP Vinyl Female Jack Converter
20.79 USD
102548-02 Hot Surface Igniter For Desa/Reddy/Master/Remington Heater Replacement
29.79 USD
SSD Expansion Split Card Supports 4 Nvme M.2 PCIE 4.0 x16 4 x 32Gbps New
31.49 USD
5Pack 3.15mm Thickness Watch Replacement Quartz Movement For SL68 Watch
8.79 USD
Product Description
433Mhz DC 5V-30V 1CH Universal Wireless Remote Control Switch Relay Receiver Module RF Transmitter 433Mhz Remote Control
Specifications:
Input Voltage: DC 5 ~ 30V
Quiescent Current: 5mA
Receiving Sensitivity: >97dbm
Remote control distance: Approx. 30 meter
Model switching: Momentary&Toggle
Frequency: 433 MHZ
Receiver size: 35x31.5x17mm
Remote control size: 50 x 50 x 13mm
Remote control battery: 2* CR2016 batteries (Included)
Wiring type: ixed terminal
+V : DC5 ~ 30V "+" input ;
- V: DC5 ~ 30V "-" input ;
NO: Output , normal open;
COM: Output , common ;
NC: Output , normal close.
Features:
1. Fixed On The Wall For Use: You can stick the remote control on the wall so thatyou can open your garage door when you are not driving.
2. The remote control can be installed anywhere on the wall and does not require wires, it can make our lives more convenient.
3. More intelligent design can make our lives more convenient.
Instruction Manual:
1. Clear code: Press the Learning Button on the receivers for 8 times, the codes will be cleaned,After cleaning the code, all the remote control cannot work any more.
2. Learning the Code:(Momentary)
Press the learning key on the receiver once time, it comes into momentary setting mode, Wait for a moment, the LED will be off, it comes into learning state,
Push the remote button, LED indicator on the receiver board will flash then come off, After 3 seconds, the LED indicator will be on again, learning successfully
Learning the Code: (Toggle)
Press the learning key on the receiver twice time, it comes into toggle setting mode.
Wait for a moment, the LED will be off , it comes into learning state.
Press the remote button, LED indicator on the receiver board will flash then come off.
After 3 seconds, the LED indicator will be on again, learning successfully.
Package Includes:
1X Receiver
1X Remote control(Included 2* CR2016 batteries)
Note:
*For your convenience, the remote control and receiver have been paired.
*Don't operate control buttons rapidly and frequently , because the controller is controlled.
by microprocessor , each operation state will response in 1second.
*If discover the LED lights darken or remote distance shorter, please replace the battery.
1. Items sent from US warehouse.
If you have any questions, our Customer Service staffs welcome you to email us. We strive to answer all questions and resolve any problems as quickly as possible.
We care about our valued customers, and will always try to help you. So if you have any problems, You can contact us 7*24, we will reply at the first time.